CasementCool

How to measure your window for a slider/casement AC or portable vent kit

Last reviewed 18 November 2026 · Based on manufacturer installation instructions linked below

Purpose-built slider/casement air conditioners publish opening ranges less than an inch wide. Measure the way the manual measures, write the numbers down, and compare them with the directory before you buy anything.

Use your model's manual as the final word. The steps below summarize what Keystone, Frigidaire, Koldfront, Whynter and Midea say in their own installation documents. Windows differ, and every manual warns that its dimensions can vary with your frame.

What you need

Slider/casement window units (tall, narrow ACs)

  1. Measure the width of the clear opening, the space the cabinet will actually sit in. The manuals we checked all start at 15½ in minimum. Keystone's product page caps the KSTSW08B at 16.3 in, and the Koldfront and Frigidaire instructions say 16¼ in maximum (for casement windows).
  2. Measure the height from the mounting platform up. Frigidaire and Keystone both say: “Height measurement must be of a clear opening above mounting platform.” Minimum heights in the manuals are 21¼–21½ in with the window panel retainer fitted (20-5/16 in without it), and maximum heights run from 39-7/16 in to 40 in.
  3. Allow for your window's hardware. The same manuals note that “due to a variety of stop and track arrangements, the above dimensions may vary slightly.” Measure inside any stops or tracks the cabinet has to clear.
  4. For a crank-out casement, check how far it opens. Frigidaire's casement instructions say to open the window as far as it goes, remove the crank handle so the platform can be fastened, and that if the window “cannot open far enough (more than 15-1/2″) for the cabinet to clear,” the window has to be removed entirely by drilling out rivets. Koldfront's manual says to contact a professional if removal is needed.
  5. Wood-frame casements may need a frame built. Keystone's manual says it “may be necessary to construct a frame, using at least 1-inch thick wood, with a 15-1/2-inch wide opening.”
  6. Check the outlet before the window. Koldfront: the power cord must reach “within 6 feet of a grounded 3-prong outlet. Do not use an extension cord.” The Frigidaire and Koldfront instructions call for a 115 V, 15 A fused supply, and the Keystone, Frigidaire and Koldfront manuals all require a separate circuit serving only the air conditioner. If you're unsure about your wiring, ask a qualified electrician.
Renters: several of these steps, like removing a crank handle, drilling a sill or taking out a sash, are changes your lease may not allow. Ask your landlord first. If the answer is no, the portable route below is usually the remaining option. This isn't legal advice.

Portable ACs (window kit)

  1. Measure the opening where the kit will sit. Whynter's manual starts with: “Measure the window opening where the window kit will be installed.” In a hung window the kit spans the width. In a horizontal slider it stands upright and spans the height.
  2. Compare that number with the kit length range. For example, Whynter lists 28–82 in for the ARC-1230WN kit and 20–56 in for the ARC-14S. Midea's Duo manual lists slider combinations from 19.1 to 63.8 in. The directory shows each range.
  3. Too long? The kit can be trimmed, but never at the hose end. Whynter: “Never cut into the exhaust and intake hose cut-outs.” Too short? Whynter suggests buying an additional kit.
  4. Casement or awning windows need a different kit. Whynter says its included kit is designed for sliding windows. A hinged sash needs an aftermarket fabric kit or a custom panel, and many fabric kits don't fit hose-in-hose (dual-hose) models. Match the kit to your unit's hose count and diameter.

Write it down like this

Window type: casement (crank-out) · Clear width: 15 9/16 in · Clear height above sill/platform: 34 1/4 in · Opens to: 17 in · Outlet: 4 ft away, 3-prong · Landlord OK to drill: no

Then open the directory and type your width and height into the filters.

Sources